Bound to Please Heavy Duty Nipple Clamp

The Bound to Please Heavy Duty Nipple Clamp is a vice-style clamp built around a screw-pin rather than a fixed clip strength — turn it to close the jaws, back it off to ease the pinch, and the exact pressure is yours to set instead of being decided for you at the factory. A metal chain joins the pair, so any movement or tug travels between them as an extra layer of drag on top of whatever pinch you’ve dialled in. Because control sits in the screw rather than in a preset tension, this pair suits a first attempt at nipple play just as well as it suits someone who already knows their range.

Start loose. If clamps are new to you, test the pressure on a fingertip before going anywhere near skin that matters more, then tighten in small increments, pausing between each one to check how it feels. Anything that reads as a sharp tease should stay well short of numbness — if sensation dulls or disappears, loosen off rather than pushing further. Release the jaws slowly rather than snapping them open, particularly after wearing them tight, and don’t leave them clamped down hard for long stretches. The metal itself is nickel-free, which takes one common source of irritation off the table for anyone with a metal sensitivity.

Things to know:

• Heavy-duty, vice-style nipple clamps from Bound to Please, in nickel-free metal with a silver finish
• Screw-pin adjustment gives stepless control over pinch strength, from a light hold to a firm clamp
• The two clamps are joined by a metal chain, adding tug and drag sensation on top of the clamp pressure
• Compact size: approx. 38 x 4cm (15 x 1.5in), weighing around 85g
• Mechanical design — no batteries or charging needed
• Suitable for both first-time nipple play and experienced kink/BDSM use

In the box:

• 1 x Bound to Please Heavy Duty Nipple Clamp pair, joined by chain

Frequently Asked Questions

How do I control how tight the Bound to Please Heavy Duty Nipple Clamp grips?
The Bound to Please Heavy Duty Nipple Clamp uses a screw-pin on each jaw, so pressure is stepless rather than fixed at one setting. Turn it in to tighten, back it off to ease, and stop wherever feels right for you.

Is the Bound to Please Heavy Duty Nipple Clamp suitable for beginners?
The Bound to Please Heavy Duty Nipple Clamp works for a first attempt at nipple play because the pressure starts at zero and only builds as far as you turn the screw. Start loose, test on a fingertip first, then increase in small steps.

How should I remove the Bound to Please Heavy Duty Nipple Clamp after use?
The Bound to Please Heavy Duty Nipple Clamp should be released slowly rather than snapped open, especially after being worn at a tighter setting, and shouldn’t be left clamped at high pressure for extended periods.

Why Shop With Wicked Sex Toys?

Discreet Packaging: No markings on the address label or the parcel indicating contents or sender — your privacy, kept.

Fast Delivery: Order by 2pm for same-day dispatch on a range of delivery options.